Hand sawing is a mechanical procedure that involves great techniques. Hand sawing requires the constant practice of using the handsaw in cutting the wood straight. This involves a natural body pattern that is necessary to follow, and also making the pattern is efficient. Having a straight saw requires regular practices and various tools that will enable perfection. Woodworking as a project requires the use of Handsaw that is used best to cut exact and precise shapes of wood. Sawing of straight wood requires several basic skills with perfect practices as those seen from DIY projects.
Basics steps involved in Sawing
- Use of light pressure.
- Keep the blade in a perpendicular manner to work, and the saw at either 45 or 90-degrees.
- Keep the blades sharp.
- Keeping of saws dry and clean.
- Making use of clamps.
Three Steps Involved to have a straight Saw with Handsaw
There are several ways of sawing straight with a handsaw. However, these are three best ways for sawing straight with a handsaw.
- A Cut Squared piece of Wood: In securing the wood, you place the wood on top of the work bench. Mark the wood with a pencil or knife using a tape and square, then draw the line across the wood. After which use the square piece of wood as a guide and clamp it against the wood, then apply little pressure gently on the handsaw. Then remove the clamped squared piece of wood after the wood has been sawed to depth. Try to the keep the handsaw at a level of 90 degrees to the clamped guided wood.
- Use of David Barren guide: It is used in cutting the hinge of the wood, you can place it at 90-degree to keep the cut in a straight line. The David Barren guide usually gives a clean and straight cut; this requires great attention on where the saw is hitting on the wood so as to prevent a miss.
- Magnet saw guide: The magnet saw guide has three magnets that are attached to the handsaw when cutting the wood in a straight manner. It is a sort of clamp use in clamping of the wood. After clamping, then apply pressure gently on the saw and focus on the line drawn on it. When using the magnetic saw guide, it requires speed and accuracy.
Recommended Saw used in Straight Cut
Having the best saw makes a huge difference in a straight cutting of wood. However, it is a matter of choice in getting this done in quick time. There are various types of saws used in getting the best straight cut. This includes the following;
- Japanese saw; this gives a better taste when cutting a piece of wood, provided it is perfectly squared. This saw has a smaller teeth with a diameter of 0.2-0.6mm. It requires a pull or pushes when cutting the piece of wood, when making use of it the blade becomes straight and this gives an accurate result. It has two principal types which are the Ryoba (it has replaceable blade, smaller in size, dual blades, and has a length of 200-300mm) and the Dozuki (it is a single fine-tooth crosscut blade and reinforced back edged, it comes a thinnest blades of diameter from 0.01 – 0.5mm, and favorites for woodworkers doing fine joinery). What the Japanese saw is used for easy and precise cutting.
- Western Saw; this saw also give a high accuracy in wood cutting and is usually used along with a squared piece of wood.
In conclusion, having a straight cut requires using either a Japanese or Western Saw. These saws give accuracy and better precision in cutting a piece of wood. It requires a great technique and lots of practice to become perfect.