This great little lathe can be made in just a few moments. Having a small wood lathe around for little woodturning tasks can come in useful. With this straightforward develop, we can make all types of great woodworking jigs. That’s awesome, just the simple requirements and inexpensive as well as simple. In this article, you will learn a good project called How to make a mini lathe and this is one of the time and money saving process and this will work fine so just go further and make a mini lathe. As we know the lathe machine is costly and sometimes cannot afford so this will assist you and work correctly.
Gather Square Wood Pieces
Just start with six square pieces of small wood so you may make pieces by wood as need using the cutter. Now you have to use drill machine to make four holes in each square wood pieces in which we can use the screw.
Use Glue To Affix Square Wood Pieces
Affix two of them using the glue and keep for a minute for dry and use the screw to make it stable. You need to use long wood pieces to attach with small wood pieces both the side and Make some mark to fix to bear on square pieces and make the hole for that using drill machine.
Make two screws and their head side and make it movable in bearing holes so it will move properly and work correctly. Now it is assumed that you have used two open screws from both the sides by cutting its head and applied in bearing hole and it is working fine.
Now you have to fix them on the table what you have created two sides so have some screws and set one of them so it will not move while working and there should be enough space between them because you will use wood pieces between to work on. So if you have fixed both the sides, we can go ahead.
Have a round piece of wood in which you have to work and make the hole both the ends using drill machine. Now fix this round wood in both the end and finally attach the second end of the screw. So it will move inside this two side stand. Have one another piece of wood to fix in front of round wood to keep your hand properly and work correctly.
Get Ready To Work With Mini Lathe
If you have done all this process and checked by hand for rounding correctly the wood so here you need to use drill machine.
- First, make switched on always for drill machine switch because you will use on / off process directly by the other switch.
- Attach drill machine with one side screw which is attached to the bearing. Now you are the close start you work and do the woodworking as usual. Just few minute of wait and you will have your mini lathe machine.
- Now this is time to testing by on the switch and has some demo now have a wood peeling knife to make a design etc.
Now you can see this mini lathe is working fine as same as available in the market and this is easy to make with little cost. So today you learned about the making mini lathe and save the money.
So just try this tips in your home and got the own mini lathe, this is an awesome project and you will enjoy by making this and after making you will enjoy working with this mini lathe. So get ready for work and be happy.