Crown molding term is used for a large group of moldings designed to add a flare to some finished top edges. These may be wooden, made from plaster of Paris, plastic or even foam material. These moldings are a great help to cover up flaws as these are a visual treat adding a touch of elegance. The Wooden crown is available hundreds of profiles, and moreover, these can be painted, stained or even left natural.
Who needs moldings?
These are usually used to cap walls, cabinets, and pilasters, etc., extensively adding value in creating interior and exterior cornice assemblies as well as window and door hoods. Architects and interior professionals are using crown moldings to enhance appearance as decorated wooden or plaster trim at corners where walls make an angle with ceilings.
Installing Crown Moldings
The molding is applied along the typical seams where the ceiling is meeting walls, not usually placed flush against the ceiling nor against the wall. That is, though, not a rule as imagination has its flight and some experts opt for exceptions too.
Professionals adopt two common ways for fashioning inside corners. They give priority to using a compound miter saw for cutting the ends of pieces placed on corners simultaneously along the two axes. The alternate method is ‘copying.’ The copying process goes in two-steps. First, they cut a simple miter and as a second step they use a coping saw for undercutting the miters. Now manufacturers have come up offering crown molding in different like foam and plastic too. These moldings are provided with standard corner blocks, and that is why these have become popular with DIY enthusiasts in their home improvements.
When you use a coped joint for some inner corners, it saves you from the trouble of determining and cutting the exact inside degree precisely since most of those corners do not measure exactly 90/45 degrees. On the other hand, outside corners those must be mitered applying due care as all outside corners may not measure right. In case the angle is not precisely 45/22.5 degrees then verify corner angle or by using a scrap piece for obtaining the right measurement before the final cut.
Crown molding may also be intimidating, as our walls often are not flat and also nailing is often difficult. You need not worry as a three-piece system comes to solve the problems. In this case, you need to install trim on your ceiling and the walls followed by adding a crown. When these three are combined, they look elegant and installed more easily compared to a single large piece. These cuts are tricky, but with patience and practice, you will master the trick too.
Crown Molding Ideas – Look, Inspire Yourself and Plan
- We know that all cakes do not need icing, but they are perhaps better with the sweet mixture. The same holds true for a room that is decked in trim. It is not essential, but these crown moldings goes a long way achieving charm attached to an old house. There are several different styles of molds. Famous ones are Federal, Early American, Greek Revival, Colonial Revival, Georgian, Colonial Revival, Craftsman and Traditional Revival. Take an unbiased look on your walls and decide for the perfectly suits your rooms.
- When you use some simple and elegant beading, it will make this (Federal Style) crown molding for helping a room with low-ceilinged having feminine neutral accents to be read as voluminous.
- Especially at imposing windows, there are typical four-foot bumps together with visual cues. This is certainly like a small-scale Early American Style molding to help a reworked kitchen look larger. In this case, the cyma recta curve which is convex at the inner edge and concaves at the outer edge while the crown meets kitchen ceiling, its simple beading will make this molding quite enough of a feel and look for the bold-colored kitchen like this.